磁罗盘地面校准：

1.开启航电系统，先由设备至少运行5分钟。

Turn on the SkyView system and allow it to warm up for a minimum of 5 minutes.

2. 将航空器移至开阔区域以便在四个方向进行移动(东，南，西，北)。

Move the aircraft into position so that it is convenient to orient it in the four cardinal directions.

3. 进入显示器的设置菜单，进入罗盘校正程序：

Enter the Setup Menu on the SkyView display and go to the Compass Calibration Wizard (SETUP MENU > HARDWARE CALIBRATION > ADAHRS CALIBRATION > COMPASS CALIBRATION). Note - GPS data on the Compass Calibration Page must be green. If it is red, GPS data is not valid.

4. 使航空器朝向东（East）、南（South）、西（West）或北（North）四大方位。

Orient the aircraft to North, South, East, or West.

5. 当航空器稳定的朝向所选方位后，按钮确定航空器当前所对方位。（例如- 当航空器所对北方，则按“NORTH”键）。

When the aircraft is stable at the chosen orientation, push the button indicating the direction the aircraft is oriented in. Example – when the aircraft is pointed North, push the NORTH button.

6. 等到数据采集达到100%。

Wait for data collection to reach 100%.

7. 将航空器旋转至朝向下一方位，按照4.5.6步骤进行操作。

Rotate to the next cardinal direction and repeat steps 4, 5, and 6 for any remaining headings.

8. 校正完成时会显示“CALIBRATION COMPLETE”，按“FINISH”键退出校正序。

CALIBRATION COMPLETE appears when calibration is complete. Press FINISH to return to menu navigation mode.

If there is a SV-ADAHRS-200 and SV-ADAHRS-201 installed, the Compass Calibration is performed simultaneously. If the Compass Calibration fails on only one of the units, a message will appear: CALIBRATION FAILED – S/N xxxx